Blog | Elisa Industriq

Closed Loop Automation In Telecom | QoS vs QoE | Polystar

Written by Sari Saranka | Nov 18, 2026, 1:47:08 PM

Telecom networks are becoming too complex, dynamic and distributed to operate efficiently through manual processes alone. Cloud-native architectures, 5G, network slicing, increasingly diverse services and growing customer expectations are creating an operational environment in which identifying a problem is no longer enough. Operators must be able to quickly detect issues, understand their impact, decide what to do, act safely and verify that the action achieved the intended outcome.

This is where closed loop automation can help.

Rather than treating monitoring, analytics and automation as separate disciplines, closed loop automation connects them into a continuous operational cycle. Network data is observed, conditions are analyzed, corrective actions are selected and executed, and the results are measured to determine whether the problem has actually been resolved.

The important word is closed. Automation does not end when an action is executed. The outcome feeds back into the system, allowing it to confirm success, take further action when necessary or escalate the situation to an operator.

What Is Closed Loop Automation in Telecom?

In summary, closed loop automation is a continuous network operations solution that identifies, analyses, and acts upon issues without the need for human intervention. The outcome is then measured to confirm whether the action worked, feeding back into the loop.

At its simplest, a closed loop can be represented as:

Observe → Analyze → Decide → Act → Verify

The network continuously produces information about its state and behavior. This can include alarms, configuration data, topology, performance counters, telemetry, service information and detailed traffic observations.

Analytics then converts these signals into operational understanding. Instead of reacting independently to thousands of events, the system can correlate information across technologies and domains, identify anomalies, determine likely root causes and assess the impact on services or customers.

A decision is then made according to predefined policies, rules, algorithms or increasingly AI-assisted reasoning. The resulting action might include changing a configuration, restarting a network function, adjusting capacity, modifying traffic routing or creating and enriching a ticket for further investigation.

Finally, the system monitors the network and service again.

Did performance recover? Did the alarm disappear? Has service quality returned to the required level? Has customer experience improved?

Only when the result is verified is the automation loop truly closed. This continuous verification principle is also central to Polystar's approach to closed-loop assurance.